Machined parts produced for industrial sectors
Innovation in the service of precision – Tailor-made industrial projects
Every project entrusted to Palumbo Industries demonstrates our ability to develop, industrialize, and produce precision parts tailored to the specific needs of each sector.
From co-design to mass production, we develop comprehensive solutions that combine technical expertise, performance and reliability.
Behind every machined part lies an idea, a technical challenge, and industrial expertise.
Examples of machined parts for the automotive industry
Réflecteurs optiques pour bloc d’éclairage LED usinés en profilé aluminium 2017 avec procédé de fraisage poli-miroir breveté.
Optical features : reflectance coefficient > 85%
Hydraulic actuator component, machined out of C45 profile.
Pignons d’entrainement avec taillage de denture pour moteurs électriques de coffre en 44SMn28.
Spacer for dual clutch torque converter, machined out of a precise 16MnCr5 profile, with carbonitriding.
Specific requirements for roughness and waviness.
Structural safety component for electric vehicle, machined out of a thin wall 6106-T66 aluminum profile with enhanced rigidity and weldability.
Axe d’attelage pour vanne EGR usiné en profilé inoxydable X30Cr13 avec traitement thermique et passivation.
Ball joint for steering column made of 44SMn28 bars or profiles.
Lock bolt for steering column, made of 11SMn37 or C45 profiles.
Hydraulic component of braking system out of precise aluminium profile, including high cleanliness requirements.
Component for lightweight frame assembly.
Structure and anti-vibration components out of 6060-T66 and 6061-T6 aluminum profiles
Car body components (socket and towage nut) out of 6060 aluminum profile
Plugs and sockets for high voltage connectors for vehicles and for charging stations out of copper-based profiles (Cu, C11000H04, TeCu, C1500), including silver plating to enhance electrical conductivity.
Lock bolt for steering column, made of 11SMn37 or C45 profiles.
Ball joint for steering column out of 44SMn28 profile.
Torque converter component for thermal transmission.
Component (guide) for hydraulic actuator
Electric drive shaft.
Suspension component
Optical reflector for LED or laser lighting out of aluminum profiles, with reflectance coefficient 85%.
Drive pinion including special teething, for powered car trunk
Examples of machined parts for aerospace
Composant d’entrainement usiné en Inconel 718.
Fasteners for aircraft cabins, machined from 7075-T6 and 6082-T6 aluminum.
Guiding rails for aircraft cabins out of 7075-T6 and 6082-T6 grades.
Examples of machined parts for capital goods equipment
Machined fastener out of C45 profile.
Fastener out of 20CrMo steel profile. Hardness 32-38 HRC.
Fastener out of a 6060-T6 aluminum profile.
Binding component for pergolas and verandas out of ai 6060-T6 aluminum profile.
Watch bracelet link out of a 3016L stainless steel profile.
Barre d’étanchéité pour métier à tisser usiné en profilé acier S335.
Examples of machined parts for urban mobility
Primary shaft out of 42CrMoS4+QT, including class-6 teething, nitrocarburizing, grinding and 100* camera inspection.
Automatic gearbox component out of 44SMn28.
Structural safety component for electric bus, machined out of a thin wall 6106-T66 aluminum profile with enhanced rigidity and weldability.
Examples of machined parts for connectivity applications
Low and high voltage connector, machined from a C11000 copper profile, including silver plating.
Low and high voltage connector, machined from a C11000 copper profile, including silver plating.
Low and high voltage plug out of a Te Cu14500 copper profile.
A partnership-based approach
Our achievements are the result of close cooperation with our customers, from design to delivery.
This tailored approach allows us to guarantee :
- a measurable technical performance
- a stable production over time
- a constant quality, guaranteed by our IATF 16949 and EN 9100 certifications